Corrosion Inhibitor -  BHP 1050

Share:


Corrosion Inhibitor - BHP 1050



bmSOLUTION® BHP 1050 is a blended product that contains organic catalyst to accelerate the reaction rate in removing dissolved oxygen in the feed water, even at low temperature. This product forms strong passivation film onto the iron and copper metal surfaces in the condensate system and after boiler section, rendering them more resistant to corrosion.

Treatment dosage will depend on the dissolved oxygen content, iron level and copper level in the feed water and chemical residual desired in the boiler. Our representative will provide you with proper control requirements for your specific application

TYPICAL PRODUCT PROPERTIES

Appearance : Colorless to pale yellow liquid
Specific Gravity : 0.9 - 1.1
pH (neat) : 9 – 11
Flash Point : None

APPLICATION
bmSOLUTION® BHP 1050 is recommended to fed continuously into the pre-boiler section, preferably to the deaerator storage or point is dictated by the specific problem to be corrected.

DOSAGE AND CONTROL
Treatment dosage will depend on the dissolved oxygen content, iron level and copper level in the feed water and chemical residual desired in the boiler. Our representative will provide you with proper control requirements for your specific application.

HANDLING PROCEDURE
Avoid inhaling vapor during opening of the drum or carboy. Wear safety face shields or goggles, rubber gloves, long pants and long sleeve shirt when handling. Please refer Material Safety Data Sheets for details on health and safety information.

PACKAGING
bmSOLUTION® BHP 1050 is available in 25kg and 200kg drum.

 Inquiry - Corrosion Inhibitor - BHP 1050