WPC 6001 Natural Organic Coagulant

Share:


WPC 6001 Natural Organic Coagulant



GENERAL DESCRIPTION

bmSOLUTION® WPC 6001 is a powder form of high quality coagulant for potable water treatment and wastewater treatment. This product is a special natural organic material to give much stronger coagulating and flocculation power than ordinary aluminum and iron salts and therefore does not contribute any aluminum or iron to treated water or sludge.

It is suitable for water with high turbidity, provides simplicity in usage, reduced or no consumption of alkali aid and it is effective in wide range of pH.

TYPICAL PRODUCT PROPERTIES

Appearance : Brownish powder
pH (aq. sol. 10% w/v) : 1.8 – 2.7

APPLICATION

bmSOLUTION® WPC 6001 is recommended to feed as diluted solution into raw water where good distribution and mixing can be assured.

DOSAGE AND CONTROL

Dosing by diaphragm metering pumps of non-corrosive material is suitable. Treatment dosage will depend on the type of system, operating condition, nature and extent of contamination and degree of control required. Our representative will provides you with proper control requirements for your specific application.

HANDLING PROCEDURE

Wear safety face shields or goggles, rubber gloves, long pants and long sleeve shirt when handling. Please refer Material Safety Data Sheets for details on health and safety information.

PACKAGING

bmSOLUTION® WPC 6001 is available in 25kg bag.


 Inquiry - WPC 6001 Natural Organic Coagulant